Manufactured in Europe, these small rectangular square balers have what it takes to produce firm uniformed bales, time after time. For bales that feature consistency again and again, a rock solid John Deere Baler is the answer.

 JOHN DEERE 349 WIRE TIE RECTANGULAR BALER

                 Produces bales of 36 x 46 cm adjustable from 0.3 to 1.3 m in length.

                 1.75 m wide pick-up flare tapers to a 1.56 m intake width,

                 close tined four (4) bar pick-up with 96 spring loaded tines.

                 Auger feeding system for reliability and smooth feeding.

                 1.9 m² feed opening prevents plugging even in the heaviest crops.

                 Roller supported plunger with replaceable wear strips with a

                 76 cm stroke operates at 80 strokes per minute for capacity and high performance.

                 Large diameter heavy flywheel powers through tuff spots.

                 Reliable John Deere wire twisters and wire boxes standard.

JOHN DEERE 359 WIRE TIE RECTANGULAR BALER

            Produces bales of 36 x 46 cm adjustable from 0.3 to 1.3 m in length.

            1.75 m wide pick-up flare tapers to a 1.56 m intake width

            close tined six (6) bar pick-up with 144 spring loaded tines.

            Auger feeding system for reliability and smooth feeding.

            1.9 m² feed opening prevents plugging even in the heaviest crops.

            Roller supported plunger with replaceable wear strips with a

            76 cm stroke operates at 92 strokes per minute for capacity and even higher performance.

             Large diameter heavy flywheel powers through tuff spots.

             Reliable John Deere wire twisters and wire boxes standard.

 Twine tying is available as an OPTION on both the 349 and 359 small

rectangular balers.